Production type machines are heavy oil machinery equipment, and when faults occur, the maintenance time is longer, so it is necessary to maintain and prevent faults correctly. Below are two daily maintenance items for the
Vertical Disc Injection Molding Machine for your reference.
1. Glue injection system
1. Insist on external cleaning of cylinder core appearance, cylinder sub columns, material pipeline motor columns, valve seat barrel mandrels, etc., to prevent pollution from accumulating outside and hiding in the gaps of Machine element, affecting performance;
Vertical Double Slide Injection Molding Machine.
2. Regularly check the system nuts to ensure their normal operation;
3. Take out some processable plastics from the thread every three months, because some threads should be coated with heat-resistant grease (red lead or Molybdenum disulfide) at high temperature to avoid being worn;
Household Plastic Mold.
Vertical disc
Injection Molding Machine 4. Except for plastics, pigments, and additives, other items shall not be placed in the product to damage the screws and additives;
5. When the vertical disc injection molding machine does not reach the preset temperature, do not start the hydraulic motor drive, spray glue, or loosen it, otherwise it will damage the screw head;
2. Locking and template
1. Strictly adhere to the external cleaning of the mold barrel core shaft, mold barrel columns, and upper and lower columns to prevent dirt accumulation and damage to these components during operation;
Servo Energy Injection Molding Machine.Precision Core Parts 2. Control the pressure, speed, and position adjustment of the parting stroke to reduce impact and avoid damage to the template and mold;
Vertical disc injection molding machine
3. Every time the mold is closed, it must be opened to allow the gap between the upper and lower molds to stick. If the mold is fully opened, the machine will be in working condition because the upper template and some self weight are due to the mold. Affects the service life of components such as oil seal valves;
4. The auxiliary mold fixing screw can prevent the use of alloy screws with high hardness. The depth of locking the screw of the vertical disc injection molding machine into the teeth must be greater than the corresponding depth, and the tightening torque must be appropriate. Before fixing the mold, it is necessary to check whether the mold and fixing surface are clean. If necessary, use a wipe.
by eleven
Ningbo Chenwei Machinery Technology Co.,Ltd
